Uysal, T. (2022). Economic analysis of rare earth element processing methods for Mountain Pass ore. Journal of the Southern African Institute of Mining and Metallurgy, vol. 122, no. 7, pp. 407–412. http://dx.doi.org/10.17159/2411- 9717/1989/2022
|
Alican Aktağ, Kaan Sayit, Bradley J. Peters, Tanya Furman, Jörg Rickli, (2022). Trace element and Sr-Nd-Hf-Pb isotopic constraints on the composition and evolution of eastern Anatolian sub-lithospheric mantle. Lithos, 430–431,106849. https://doi.org/10.1016/j.lithos.2022.106849 |
Güler, Ö., Tekeli, M., Taşkın, M., Güler, S.H., Yahia, I.S. (2021). The production of graphene by direct liquid phase exfoliation of graphite at moderate sonication power by using low boiling liquid media: The effect of liquid media on yield and optimization. Ceramics International, 47(1), 521-533. https://doi.org/10.1016/j.ceramint.2020.08.159 |
Şimşek, T., Akgül, Ş., Güler, Ö., Özkul, I., Avar, B., Chattopadhyay Arun K., Aksu Canbay, C., Güler, S.H. (2021). A comparison of magnetic, structural and thermal properties of NiFeCoMo high entropy alloy produced by sequential mechanical alloying versus the alloy produced by conventional mechanical alloying. Materials Today Communications, 29, 1-12. Doi: https://doi.org/10.1016/j.mtcomm.2021.102986 |
Güler Ö., Bağcı N., Güler, S.H., Aksu Canbay, C., Safa, H., Yilmaz, T.A., Taşkın, M. (2021). The effect of equal-channel angular pressing (ECAP) on the properties of graphene reinforced aluminium matrix composites. Journal of Composite Materials, 55(13), 1749-1768., Doi: https://doi.org/10.1177/0021998320979040 |
Güler Ö., Başgöz, Ö., Güler, S.H., Aksu Canbay, C., Açıkgöz, Ş., Boyrazlı, M. (2021). The synergistic effect of GNPs?+?CNTs on properties of polyester: comparison with polyester–CNTs nanocomposite. Journal of Materials Science: Materials in Electronics, 32, 17436-17447., Doi: https://doi.org/10.1007/s10854-021-06275-w |
Güler Ö., Güler, S.H., Başgöz, Ö., Yahia, I.S. (2021). The effect of graphene+boron nitride/ZnO-based hybrid nanocomposites: synthesis, electrical, optical properties. Journal of the Australian Ceramic Society, 57, 1085-1095., Doi: https://doi.org/10.1007/s41779-021- 00607-z |
Boyrazlı, M., Güler, S.H. (2020). Synthesis of carbon nanostructures from corn stalk using mechano-thermal method. Journal of Molecular Structure, 1199, 126976. https://doi.org/10.1016/j.molstruc.2019.126976 |
Güler Ö., Güler, S.H., Başgöz, Ö., Albayrak, M. G., Yahia, I.S. (2019). Synthesis and characterization of ZnO-reinforced with graphene nanolayer nanocomposites: electrical conductivity and optical band gap analysis. Materials Research Express, 6(9), 95602-95602., Doi: 0000-0003-0190-9630 |
Güler Ö., Güler, S.H., Taşkın, M. (2019). The production of graphene–boron nitride nanosheet heterostructures via liquid phase exfoliation assisted by a milling process. Bulletin of Materials Science, 42(1), Doi: https://doi.org/10.1007/s12034-018-1703-2 |
Güler, S.H. (2018). The production of boron nitride nanosheets using liquidphase exfoliation assisted by ball milling process. Optoelectronics and Advanced Materials-Rapid Communications, 12(11-12), 754-758. |
Güler, S.H., Boyrazlı, M., Başgöz, Ö., Yakuphanoğlu, F. (2018). The effects of nanoporous Fe2O3 synthesized via mechano-thermal process on electrical and optical properties of zinc oxide. Physica B: Condensed Matter, 547, 120-126., Doi: https://doi.org/10.1016/j.physb.2018.08.010 |
Güler, S.H., Güler Ö., Evin, E. (2017). The production of graphene nano layers by using milling exfoliation hybrid process. Fullerenes, Nanotubes and Carbon Nanostructures, 25(1), 34-39., Doi: DOI: https://doi.org/10.1080/1536383X.2016.1244531 |
Güler, S.H., Güler Ö., Evin, E., Islak, S., (2016). Electrical and optical properties of ZnO milled Fe2O3 nanocomposites produced by powder metallurgy route. OPTIK International Journal for Light and Electron Optics, 127, 3187-3191. https://doi.org/10.1016/j.ijleo.2015.12.103 |
Güler Ö., Güler, S.H., (2016). Production of graphene boron nitride hybrid nanosheets by liquid phase exfoliation. OPTIK International Journal for Light and Electron Optics, 127, 4630- 4634. https://doi.org/10.1016/j.ijleo.2016.02.033 |
Güler Ö., Güler, S.H., Veyis, S., Albayrak, M.G., Evin, E., (2016). Production of graphene layer by liquid-phase exfoliation with low sonication power and sonication time from synthesized expanded graphite. Fullerenes, Nanotubes and Carbon Nanostructures, 24, 123-127. https://doi.org/10.1080/1536383X.2015.1114472 |
Güler Ö., Güler, S.H., Yakuphanoğlu F., Aydın, H., Aydın, C., El-Tantawy, F., Duraia, E-S. M., Fouda, A.M. (2015). Electrical and Optical Properties of Carbon Nanotube Hybrid Zinc Oxide Nanocomposites Prepared by Ball Mill Technique. FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES, 23(10), 865-869. https://doi.org/10.1080/1536383X.2015.1022256 |
Güler Ö., Evin, E., Güler, S.H., Veyis, S., Keleş, A., Yardımcı, S. (2015). Synthesis of C BN hybride nano structures. JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, 17(5-6), 795-798. |
Güler, S.H., Aksoy, M., Evin, E., Güler Ö. (2014). The effect of milling parameters on synthesis of high yield boron nitride nanotube. JOURNALS OF OPTOELECTRONICS AND ADVANCED MATERIALS, 16(7-8), 831-836. |
Evin, E., Güler Ö., Aksoy, M., Güler, S.H. (2015). Effect Of Mıllıng Tıme On Formatıon Of Carbon Nanotube By Mechano Thermal Method. Bulletin of Materials Science, 38(4), 857-863. (Yayın No: 2293579) |
Özkul, İ., Karaduman, O., Şimşek, T., Şimşek, T., Canbay, C. A., Ibrahim, P. A., & Arpa, I. A. (2022). Experimental investigation of the effects of different quaternary elements (Ti, V, Nb, Ga, and Hf) on the thermal and magnetic properties of CuAlNi shape memory alloy. Journal of Materials Research, 37, 2271-2281., Doi: https://doi.org/10.1557/s43578-022-00625-y |
AKSU CANBAY CANAN, KARADUMAN OKTAY (2021). The photo response properties of shape memory alloy thin film based photodiode. Journal of Molecular Structure, 1235, 130263, Doi: 10.1016/j.molstruc.2021.130263 |
Canbay, C. A., Karaduman, O., Ünlü, N., Özkul, İ., Çiçek, M. A. (2021). Energetic Behavior Study in Phase Transformations of High Temperature Cu–Al–X (X: Mn, Te, Sn, Hf) Shape Memory Alloys. Transactions of the Indian Institute of Metals, 74(10), 2447- 2458., Doi: https://doi.org/10.1007/s12666-021-02241-6 |
Canbay, C. A., Karaduman, O., Ibrahim, P. A., Ozkul, İ. (2021). Thermostructural shape memory effect observations of ductile Cu-Al-Mn smart alloy. Advances in Materials Research, 10(1), 45-56., Doi: https://doi.org/10.12989/AMR.2021.10.1.045 |
Canbay, C. A., Karaduman, O., Ünlü, N., Özkul, İ. (2021). Study on Basic Characteristics of CuAlBe Shape Memory Alloy. Brazilian Journal of Physics, 51, 13-18., Doi: https://doi.org/10.1007/s13538-020-00823-1 |
Canbay, C. A., Karaduman, O., Özkul, İ., Ünlü, N. (2020). Modifying Thermal and Structural Characteristics of CuAlFeMn Shape Memory Alloy and a Hypothetical Analysis to Optimize Surface-Diffusion Annealing Temperature. Journal of Materials Engineering and Performance, 29, 7993-8005., Doi: https://doi.org/10.1007/s11665-020-05241-7 |
Doğan, F., Duru, E., Uysal, M., Akbulut, H., Aslan,S., (2022). Structural, mechanical, and tribological studies of Ni-B-TiN composite coating: effect of SDS concentration, Journal of Adhesion Science and Technology, DOI: https://doi.org/10.1080/01694243.2022.2060784 |
Doğan, F., Duru, E., Uysal, M. et al. (2022). Tribology Study of Pulse Electrodeposited Ni-B-SWCNT Composite Coating. JOM 74, 574–583. https://doi.org/10.1007/s11837-021-05070-6 |
Unal, A., Hillman, A. R., Ryder, K. S., Cihangir, S. (2021). Highly Efficient Defluoridation of Water through Reusable poly (aniline-co-o-aminophenol) Copolymer Modified Electrode Using Electrochemical Quartz Crystal Microbalance. Journal of The Electrochemical Society, 168(2), 022502. DOI https://doi.org/10.1149/1945-7111/abd926 |
Cihangir, S., Say, Y., Ozkul, İ., Guler, O., Guler, S.H. (2022). Microstructure and corrosion investigation of FeCoCrNiMo0, 5 (MnAl) 0, 3 high entropy alloy produced by 316 L stainless steel scrap. Materials Today Communications, 33, 104360. https://doi.org/10.1016/j.mtcomm.2022.104360 |
Unal, A., Hillman, A.R., Ryder, K.S., Cihangir, S. (2021). Electrogravimetric analysis of poly(aniline-co-o-toluidine) copolymer films in the presence of fluoride ions. Journal of Electroanalytical Chemistry, 895, 115519. https://doi.org/10.1016/j.jelechem.2021.115519 |
Dehghanpour, H., Doğan, F., Yılmaz, K. (2022). Development of CNT–CF–Al2O3-CMC gel-based cementitious repair composite. Journal of Building Engineering, 45, 103474. https://doi.org/10.1016/j.jobe.2021.103474 |
Say, Y., Aslan, N., Alla, A. M. A., Özmen, H. (2023). Influence of chemical etchings on surface properties, in-vitro degradation and ion releases of 316l stainless steel alloy for biomedical applications. Materials Chemistry and Physics, 295, pp.127139. https://doi.org/10.1016/j.matchemphys.2022.127139 |
Aslan, N., Aksakal, B., Aksoy, M. E. (2022). Boron-incorporated biocomposite coatings on 316L and NiTi alloys: Enhanced structural, antibacterial activity, and cell viability performances. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 236(10), 1572-1580. https://doi.org/10.1177/0954411922112206 |
Aslan, N., Aksakal, B., Dikici, B., Sinirlioglu, Z. A. (2022). Graphene reinforced hybrid-bioceramic coatings on porous-Ti6Al4V for biomedical applications: morphology, corrosion resistance, and cell viability. Journal of Materials Science, 57(35), 16858-16874. https://doi.org/10.1007/s10853-022-07695-7 |
Aslan, N., Kurt, M. Ş., & Koç, M. M. (2022). Morpho-structural and optoelectronic properties of diamond like carbon–germanium (DLC-Ge) composite thin films produced by magnetron sputtering. Optical Materials, 126, 112229. https://doi.org/10.1016/j.optmat.2022.112229 |
Arslan, ME, Kurt, MŞ, Aslan, N, et al. (2022). Structural, biocompatibility, and antibacterial properties of Ge–DLC nanocomposite for biomedical applications. J Biomed Mater Res., 110( 7): 1667- 1674. doi: https://doi.org/10.1002/jbm.b.35027 |
Hasanoğlu Özkan, E., Aslan, N., Koç, M.M. et al. (2022). Fe3O4 nanoparticle decorated novel magnetic metal oxide microcomposites for the catalytic degradation of 4-nitrophenol for wastewater cleaning applications. J Mater Sci: Mater Electron 33, 1039–1053 (2022). https://doi.org/10.1007/s10854-021-07376-2 |
Aksoy, M.E., Aksakal, B., Aslan, N. et al. (2021). Boron-Doped Hydroxyapatite Coatings on NiTi Alloys Using the Electrophoretic Deposition Method: Enhanced Corrosion and Adhesion Performances. J. of Materi Eng and Perform 30, 7365–7375. https://doi.org/10.1007/s11665-021-05968-x |
Aslan, N., Aksakal, B. (2021). Effect of graphene reinforcement on hybrid bioceramic coating deposited on the produced porous Ti64 alloys. J Porous Mater 28, 1301–1313. https://doi.org/10.1007/s10934-021-01081-5 |
Aslan, N., Aksakal, B., Findik, F. (2021). Fabrication of porous-Ti6Al4V alloy by using hot pressing technique and Mg space holder for hard-tissue biomedical applications. J Mater Sci: Mater Med 32, 80. https://doi.org/10.1007/s10856-021-06546-2 |
Aslan, N. (2021). Structural, photovoltaic and optoelectronic properties of graphene–amorphous carbon nanocomposite. J Mater Sci: Mater Electron 32, 16927–16936. https://doi.org/10.1007/s10854-021-06254-1 |
Aslan, N., Ceylan, B., Koç, M. M., Findik, F. (2020). Metallic nanoparticles as X-Ray computed tomography (CT) contrast agents: A review. Journal of Molecular Structure, 1219, 128599. https://doi.org/10.1016/j.molstruc.2020.128599 |
Yetim, N.K., Aslan, N., Sarıoğlu, A. et al. (2020). Structural, electrochemical and optical properties of hydrothermally synthesized transition metal oxide (Co3O4, NiO, CuO) nanoflowers. J Mater Sci: Mater Electron 31, 12238–12248. https://doi.org/10.1007/s10854-020-03769-x |
Akkurt, N. (2022). Investigation of the effect of aspect ratio in an enclosure filled with phase change materials and its effect on thermal management of lithium-ion batteries: Applicable for storing solar energy. Journal of Power Sources, 539, 231606. https://doi.org/10.1016/j.jpowsour.2022.231606 |
Akkurt, N., Aghakhani, S., Mahmoud, M.Z., ElSayed, M., Din, T.E. (2022). The influence of battery distance on a hybrid air-cooled cylindrical lithium-ion battery phase change material thermal management system for storing solar energy. Journal of Energy Storage, 52, 104873. https://doi.org/10.1016/j.est.2022.104873 |
Akkurt, N., Aghakhani, S., Mahmoud, M.Z., Abdelrahman, A. (2022). Cooling of non-sloped, positively sloped, and negatively sloped arrangements of Li-ion batteries with a phase change material connected to a solar system. Journal of Energy Storage, 52, B, 104808. https://doi.org/10.1016/j.est.2022.104808 |
Kucuk, E., Pilevneli, T., Onder Erguven, G., Aslan, S., Ökten, O.E., Canlı, O., Ünlü, K., Dilek, F.B., İpek, U. (2021). Occurrence of micropollutants in the Yesilirmak River Basin, Turkey. Environmental Science and Pollution Research, Environ Sci Pollut Res 28, 24830–24846. https://doi.org/10.1007/s11356-021-13013-6 |
Erust, C., Karacahan, M. K., Uysal, T. (2022). Hydrometallurgical Roadmaps and Future Strategies for Recovery of Rare Earth Elements. Mineral Processing and Extractive Metallurgy Review, 1-15. https://doi.org/10.1080/08827508.2022.2073591 |
Tanaydın, M. K., Tanaydın, Z. B., Demirkıran, N. (2022). Optimization of process parameters and kinetic modelling for leaching of copper from oxidized copper ore in nitric acid solutions. Transactions of Nonferrous Metals Society of China, 32(4), 1301-1313. https://doi.org/10.1016/S1003-6326(22)65875-8 |
Demirkıran, N., Tanaydın, M. K. (2021). Recovery of Cu (II) by Acorga M5640 After Leaching of Malachite Ore in Perchloric Acid Solutions. Journal of Sustainable Metallurgy, 7(2), 495-505. https://doi.org/10.1007/s40831-021-00356-0 |
Tanaydın, M. K., Bakıcı Tanaydın, Z., Demirkıran, N. (2021). Determination of optimum process conditions by central composite design method and examination of leaching kinetics of smithsonite ore using nitric acid solution. Journal of Sustainable Metallurgy, 7(1), 178-191. https://doi.org/10.1007/s40831-020-00333-z |
Tanaydın, M. K., Demirkıran, N. (2020). Kinetic models for the extraction of copper by Acorga M5640 after leaching of malachite ore in perchloric acid solutions and the stripping of copper from loaded organic phase. Brazilian Journal of Chemical Engineering, 37(2), 399-414. https://doi.org/10.1007/s43153-020-00032-y |
Tanaydın, M. K., Demirkıran, N. (2019). Investigation of selective leaching and kinetics of copper from malachite ore in aqueous perchloric acid solutions. Separation Science and Technology, 54(5), 815-827. https://doi.org/10.1080/01496395.2018.1512619 |
Demirkiran, N., Tanaydin, M. K. (2014). Preparation of cupric oxide by isothermal oxidation of metallic copper powder produced by electroless deposition. Russian Journal of Non-Ferrous Metals, 55(6), 529-532. https://doi.org/10.3103/S1067821214060078 |
Demirkiran, N., Tanaydin, M. K., Ozdemir, G. (2018). Dissolution kinetics of calcined ulexite in ammonium sulfate solutions. https://doi.org/10.3989/revmetalm.112 |
Ekmekyapar, A., Tanaydin, M., Demirkiran, N. (2012). Investigation of copper cementation kinetics by rotating aluminum disc from the leach solutions containing copper ions. Physicochem. Probl. Miner. Process, 48(2), 355-367. http://dx.doi.org/10.5277/ppmp120203 |
Çınar, M., Ersever, G., Sahbaz, O., Çelik, M.S. (2011). Sepiolite/Calcium interactions in desiccant clay production. Applied Clay Science (ISI), 386-394, DOI: https://doi.org/10.1016/j.clay.2010.06.027 |
Birgül, B., Boylu, F., Can, M.F., Karakaş., F., Çinku, K., ERSEVER G. (2011). Rheological electrokinetic and morphological characterization of alginate bentonite biocomposites. Journal of Applied Polymer Science, Vol. 122 (1), 19-28. https://doi.org/10.1002/app.33627 |
Boylu, F., Hojiyev, R., Ersever, G., Ulcay, Y., Çelik, M.S., (2012). Production of Ultrapure Bentonite Clays through Centrifugation Techniques. Separation Science and Technology, Vol. 47, No. 6, 842-849. https://doi.org/10.1080/01496395.2011.634475 |
Hojiyev, R., Ersever, G., Karaağaçlioğlu, I.E., Karakaş., F. Boylu, F. (2016). Changes on montmorillonite characteristics through modification. Applied Clay Science, Vol. 127, 105-110. https://doi.org/10.1016/j.clay.2016.03.042 |